PLEASE READ BELOW!
THIS PLATE WORKS WITH CALIFORNIA COMPLIANT P365 WITH LCI (Model: 365-9-BXR3P-CA)
P365 Fuse slides require different mounting screws. Please contact us if you will be using this plate on a Fuse.
While this adapter plate plate is compatible with all other variants of the P365, we recommend the regular (non-CA) version of this plate for use on all other P365 optic ready models. That plate can be found here.
Each plate ships with one set of M3x.5x8mm screws to secure the plate to the slide, and one pair of 5-40x.375 screws to secure RMRcc to the adapter plate.
Our adapter plate is CNC machined from billet 7075 aluminum alloy (almost twice as strong as the more common and cheaper 6061 Aluminum) and Type 3 hardcoat anodized black. To minimize unnecessary weight, the plate has had as much material machined away as possible without sacrificing any structural integrity.
Installation Instructions:
1. Ensure firearm is completely unloaded.
2. Secure plate to slide using M3x.5 screws - 10IP Driver - 12in/lb (clear bag). Only CA-Compliant P365 slides, ensure the LCI rocker and spring are properly installed and captured underneath the adapter plate, as they were originally on the factory provided cover plate.
3. Secure RMRcc optic to plate using 5-40x.375 screws - 10IP Driver - 12in/lb (red bag)
4. A small amount of Blue Loctite may be used. NOTE: DO NOT USE RED LOCTITE!
5. Use driver size and torque spec listed on bag.
Tools Required:
-10IP Driver
-Blue Loctite
